Betrayed by My Best Friend Essay

Betrayed by my best friend, the more I thought about the title the more I decided that it was time to write about the betrayal that cost me so very dearly. She entered my life in August of 1978 with her three children, she rented the apartment on the other side of the old farm house my former husband and I had purchased. I was still young and naive then, and overly trusting. I thought she and her sons would be a blessing instead she used that friendship to betray me and my daughters. My former husband was cheating on me: I knew that much I just had no idea that he was cheating with two different women at the same time. One woman he got pregnant and married the other was my best friend or so I thought. I first became suspicious when I discovered she knew exactly where my former husband hid his cigarettes and alcohol. I ignored those clues; I just could not bring myself to believe she was having sex with my former husband. She knew we were having problems and even told me at one point she would gladly testify in the divorce trial if she were needed. I told her of coarse she was needed; I had to prove he was cheating on me and that he was continually abusive to me and my daughters. Imagine my surprise when she reneged and refused to testify. She had been dating a friend of mine and while I was visiting she was also there. She could not even look me in the eye but still being as naive as I was I pursued the subject with my friend who finally told me that she had indeed been having an affair with my former husband. I remember sitting and crying all I wanted was to know why, what had I done to deserve this? She never did answer me but my daughter recently told me what happened after I finally left. Apparently she was supposed to be cleaning the house and doing the grocery shopping since my former husband did not think that his children needed food. When the divorce trial became a reality, she not only would not testify on my behalf, she would not answer her phone. My attorney told me that if she was called to testify, she would be a hostile witness and possibly harm my case more than it was already harmed. My former husband’s attorney was the assistant District Attorney who happened to play golf with the presiding Judge. On the advice from my attorney she was not called, I lost my daughters to my former husband; he was working and had a good income. I was working at a minimum wage job, so the Judge decided that my daughters would be better off with their father. The girls were abused by their step mother; their father knew what was happening to them but ignored them. My best friend’s betrayal not only cost me my daughters, it cost me precious time with my daughters that I can never regain. I am no longer bitter where she is concerned, she is not worth it. Betrayal is the hardest thing to deal with because it involves not just friendship but trust. I sometimes wonder what happened to her after the trial, I would like to see her again one day and ask: â€Å"why did you betray me?†

Eight phases of moon

The side of the moon that is facing the Earth is not lit up by the sun. At this time the moon is not visible. Phase 2 – Waxing Crescent – A small part (less than 1/2) of the moon is lit up at this point. The part that is lit up is slowly getting bigger. Phase 3 – First Quarter – One half of the moon is lit up by the sun at this point. The part that is lit up is slowly getting bigger.Phase 4 – Waxing Gibbous – At this time half of the moon is lit up. The part that is lit is slowly getting bigger. Waxing means to slowly get bigger. Phase 5 – Full Moon – The side of the moon that is lit up by the sun is facing the Earth. The entire moon is lit up at this point. Phase 6 – Waning Gibbous – The moon is not quite lit up all the way by sunlight. The part of the moon this is lit is slowly getting smaller. Waning means to slowly get maller.Phase 7 – Last Quarter – Half of the moon is lit up but the sun. The par t that we can see lit up is slowly getting smaller. Phase 8 – Waning Crescent – A small part of the moon is lit up at this point. It is getting smaller by the minute. Did you know that a full moon can happen twice in one month? When this happens, the second full moon of the month is called a Blue Moon! eight phases of moon By tongietobes

Critical thinking R Coursework Example | Topics and Well Written Essays - 500 words

Critical thinking R - Coursework Example In the light of discussion by the CEO of Standard Chartered the discussion raises that if the strategies of the bank have been successful in the markets of Asia and Middle East then why the same strategies have not been applied to the Western and more developed markets at the time of crisis. The prevailing market condition develops a perception that developed and under developing markets have a considerable difference in the driving forces of market. The driving forces that derive the dynamics of banking industry are political, economical, socio-cultural, technological, legal and environmental forces. One more important thought that has been identified is regarding the main factors that differentiate the markets of developed and under developing countries in the era of Globalization. The prevailing circumstances highlight that the banks need to focus on the local markets as well along with the focus on highly framed global markets. The high competitive environment and dynamic consume r behavior have made all the banks accountable for all of its local and global strategies to enhance or modify the strategies with the passage of time to successfully compete in all the markets. In the light of the discussion by the Chairman of EMAAR properties, the real estate market of UAE is not changing it self with the recognized needs of the market. Youth of Asia is shifting to UAE with the purpose of employment and therefore with increasing number of immigrants, the real estate industry has become an important for the economy. Immigrants coming to UAE are mainly focusing on saving and are not spending too much. These immigrants are increasing in UAE with a fast rate and are searching for low cost accommodation to save their money. But unfortunately, the focus of most of the real estate developers in UAE is on a niche segment of luxury housing buyers. UAE has become a strong financial hub and the investment by multinationals in UAE is increasing as well so it is also driving

Investigation Tourism Marketing Report Essay Example | Topics and Well Written Essays - 1500 words

Investigation Tourism Marketing Report - Essay Example In 1976, the Tourism Society of England defined it as "Tourism is the temporary, short-term movement of people to destination outside the places where they normally live and work and their activities during the stay at each destination. It includes movements for all purposes."2 some components such as hotel room or accommodation for their visitors, coach and the variety of meals, even sometimes banking services also provided to the customer from this industry. The main aim of this report is to conduct an audit of the business environment (based on P.E.S.T & Porter's five forces model analysis) on Royal Bengal Airlines and conduct an Opportunity & Threat analysis on the basis of environmental audit and defining its service provided to its consumer and its marketing (partially) area from the country (Bangladesh) perspective. "A collaboration of a group of professionals who shared the same vision decided to be proactive and form RBA in early 2006. The team has evolved quickly and continues to grow from strength to strength. The founding members are UK based and come from a wide range of backgrounds and bring with them vast experiences from the business, academic and aviation world. The visionaries and the founders of RBA have been working towards this project since 1991. Due to various restrictions and limitations in the early nineties it was not possible to move the project forward"3. The growth in the Asian economy, in particular the travel sector within Southeast Asia, has created an opportunity in the market for a new airline. RBA was born as a direct result of this, with the aim of utilizing the potential development of the Asian market and turning this into a profitable and successful airline venture. To analyze the environment of RBA, it's needed to conduct an audit (based on PEST analysis and Fiv e force model analysis). "The simple acronym PEST (stand for political, economical, social and technological) serves well as an aide-memoire when considering the array of environmental forces influencing business activity. Pest analysis assembles a logical and comprehensive picture of the environment"4. By conducting an analysis (PEST) on RBA's environment, it has seen that the organization is in an excellent situation such as the political allaince between both country UK and Bangladesh is good enough to do business. Economic and Technological relation between these countries is higher such as Bangladesh export garments products to UK and Uk export technological product such as machineries, computers and other engineering technologies. As a result company takes economical (in the side of currency sharing) and technological advantage here. The social bond between two countries is higher as there is a cultural sharing and accepting tendency and RBA performing their Corporate Social Responsibility program in B angladesh. Afterbevluation it can be said that the PEST analysis goes in faovor of RBA. The another analysis is "Five Force Model analysis". "The Porter's 5 Forces tool is a simple but powerful tool for understanding where power lies in a business situation. This is useful, because it helps to understand both the strength of your current competitive position, and the strength of a position." Five Forces Analysis assumes that there are five important forces that determine competitive power in a situation. These are thoroughly given below: Supplier Power: It assesses how easy it is for suppliers to drive up prices. This is driven by the number of suppliers of each key input, the

Limitiations of Servant Leadership Essay Example | Topics and Well Written Essays - 250 words

Limitiations of Servant Leadership - Essay Example However, oftentimes, example alone is not effective in realizing the change that the leader should seek to evoke (Zhang et al, 2012). As such, the five determinants of effective power exemplification are enumerated upon as the use and application of the following: coercive, reward, legitimate, referent, expert, and informational. Whereas the servant leader can appropriately integrate degrees of reward, legitimate, expert, and informational, he/she is completely unable to draw upon the reservoir of power that comes from coercive and in large degree from referent power (Russell, 2012). As such, this represents a clear and measurable shortcoming in that the servant leader is not able to exercise the full extent of his/her power and leadership over the shareholders he/she integrates with (Tidball, 2012). Although such an approach has verifiable and measurable advantages with regards to its ability to win over the hearts and minds of those engaged within such a framework, it is, like many theories, unable to speak to all of the necessary determinants of leadership and power that present themselves. Zhang, H., Kwong Kwan, H., Everett, A. M., & Jian, Z. (2012). Servant leadership, organizational identification, and work-to-family enrichment: The moderating role of work climate for sharing family concerns. Human Resource Management, 51(5), 747-767.

1968 in U.S. History Essay Example | Topics and Well Written Essays - 1000 words

1968 in U.S. History - Essay Example The period is characterized by the entrenching of the U.S in an unpopular war in Vietnam, while violence, experimentation, unrest, and outspokenness spread throughout the nation. Leaders were assassinated on an outwardly regular basis, the Civil Rights Movement got more powers, and psychedelic music and social experimentation were rampant in most parts of the country. Many scholars view this year as shameful, divisive, or sometimes as a year that galvanized change in America. 1968 was an apex of the gradual upheaval of the 1960s. Tension that had been accumulating for the past years ultimately came to head, across a whole year of violence, revolution and grief. Dr. Martin Luther King Jr. and Robert Kennedy were assassinated; unrest was rampant in Democratic National Convention, as the media covered the Tet Offensive to expose the horrible account of the Vietnam War. The fighting in the Saigon streets during the Tet Offensive or New Year made the Vietnam too real. According to one UPI reporter, the Vietnam in this year meant a first look at death. Photographers scampered from building to building gathering photos on the fighting in the outcasts of Saigon. The North Vietnamese communist groups’ launch of the Tet Offensive in January and its success against South Vietnamese and U.S troops caused discontent and shock across the home front and marked the most intense times of anti-war disputes to date. Apart from being the most difficult and saddest year in America, 1968 was also a presidential election year. President Lyndon Johnson was on the forefront in promoting civil rights legislation but he had also greatly increased American possibility in involving in the Vietnam War. It was therefore not easy for him to leave the White House without protesters being involved; he no longer had majority support and thus announced that he would not contest for the presidency. Eugene McCarthy, a senator from Minnesota engaged in these elections and succeeded in the pri maries. Following his success, New York’s Senator Robert Kennedy decided to enter the campaign too. For a long time then, Kennedy had served in one of the highest legal offices in the nation as Attorney General in the administration of his late brother, John Kennedy. Upon his announcement to run for presidency, most citizens were very pleased with his massage, where he promised to end the Vietnam war, and to reduce racism and poverty both in America and in the whole world. Another serious event was noted in April fourth, the same year; Martin Luther King, America’s top civil rights leader was shot to death in Tennessee. He was helping to negotiate a strike between the management and sanitation employees. This made Kennedy to deliver a speech to black citizens, convincing them that what had happened was against the wishes of Americans, since they disliked hatred, lawlessness, and violence, but embraced wisdom, love, and justice. However, these words did not calm down th e black community. Their leader, Luther had peacefully led civil rights movement, yet his death cultivated violence in more than one hundred cities nationally. Soldiers were called upon to settle the riots, and hundreds of citizens lost their lives or were injured. As the primary elections went on, Robert Kennedy and Eugene McCarthy tried to show how their ideologies differed, but voters could not notice the differences. They both opposed the Vietnam War; sought enhancements in civil rights; and both promoted social reforms. Kennedy led in primaries in Nebraska and Indiana, while McCarthy led in Oregon. California had the next big primaries, and Kennedy stated that he would withdraw if he was defeated in this significant contest. He won the elections and

Data Collection and Management Techniques for a Qualitative Research Assignment

Data Collection and Management Techniques for a Qualitative Research Plan - Assignment Example The interview is without a doubt the most frequently used source of data in qualitative studies like my proposed research. This is particularly because it offers the one-to-one format of data collection and thus allows room for gathering more detailed information. Interviews range from the highly structured style, where questions are determined before the interview, to the one with the open-end, then the conversational format. In qualitative research, the highly structured format is applied primarily so as to collect socio-demographic information (Flick, 2006). In most cases, however, interviews are more open-ended and less structured. Interviews involve the interviewer asking the same questions to all the participants, but the order of the questions, the diction and the type of follow-up may differ significantly. In this regard, I will be required to establish a rapport with the respondents so as to build up trust and allow the respondent to open up his true feelings, thoughts and i ntentions. Another important qualitative data collection technique that I will use is participant observation. This method will require me as a researcher to be part of the study population and be learning from within the community to establish the important information that makes part of the research. This kind of data collection requires one to learn the modes and way of life of the study population so that it becomes effective. Data collected through such method can be written down in a field note in addition to taking video footages and used as the reference for evaluation and analysis (Creswell, 2003). Generally, observation in qualitative research involves spending time in the setting. Field notes are written throughout the observation with the focus being on what is seen. Data collection can also be done through the use of focused group discussion where the researcher identifies a topic and the respondents discuss it. Such responses are analyzed carefully to give important information relating to the research.  

Ways in Which Couples can Seek to Reduce Taxation Liabilities on Essay

Ways in Which Couples can Seek to Reduce Taxation Liabilities on Investments and Savings - Essay Example This is also the case for governments and institutions. So the question is therefore how such a financial stability can be achieved? The most obvious answer to this is by investing. Investing refers to the deliberate and calculated directing of funds into revenue generating activities. Almost invariably not all individuals are born into financial security. As a result they must therefore find ways to channel their finances such that they can grow significantly unto the future. Usually investments are made directly out of savings; savings out of personal income. The economic model for this relationship is given as i 0 f (s); s  f (y). This therefore means that investments are a consequence of foregone present consumption of personal income. This may perhaps be the elusive point to most young people eyeing for immediate financial prosperity without the sacrifice of and discipline regarding present consumption. After the establishing the origin of investments, a need arises to examine what the deciding and influencing factors for investments are. Economists present a direct relationship between investments and the interest rates for the underlined security i.e. i  f (r). Both households and institutions will make their investment decisions based on the expected rate of returns as expressed in relation to the prevailing interest rates in the market. Another influencing factor in investment determination (both the amount and area of investment) is the risk level associated with the investment. The Capital Asset Pricing Model postulates that the expected returns for any asset or investment is a function of the investor’s risk tolerance level as expressed through the variation in the realized from expected returns within the market. This means that the investments have a risk-reward mechanism where the investor’s tolerance to market uncertainties will primarily determine how much returns they shall get from chosen investments. Thirdly, the tax treatm ent on investment is also a crucial determinant for investment ventures. Investors would like to know what percentage of their earnings from investment would be paid out as tax. The tax treatment on investments made by singles, married couples and partners in civil unions is different. For this reason, this essay examines ways in which the tax obligation on investments made by married couples or those in civil partnerships in the United Kingdom can be reduced. Discussion Different types of investments have different tax treatments (www.pru.co.uk). This therefore means that the impact of any taxation as well as any tax relief will depend on the particular circumstances for the individual of which are subject to future change without notice. These considerations become more complex in civil partnerships where a disparity in the amounts earned or assets owned becomes a challenge in making financial decisions based on emotive feelings. According to British Laws on taxation, all couples (whether or not they are married or in civil partnerships or are cohabiting) are taxed separately as individuals. Every tax paying individual in Britain is entitled to the first part of their income free of tax. This is referred to as a personal allowance. All incomes in excess of this amount are therefore subject to the applicant tax rules. The personal allowance depends on the age of the individual and the total level of income over the taxable period. In this regard, there are three levels of personal allowance as shown in the table below relating to the current budget period 2012/2013: Personal income Basic personal allowance (?) Adjusted net income limit (?) Age 64 and below 8,105 100,000 Age 65-74

Population Essay Example | Topics and Well Written Essays - 750 words

Population - Essay Example In spite of this transition the total population of the country in stage IV is found to be much higher. It will be interesting to understand each stages of growth i.e. stage I through stage IV for understanding how the population eventually stabilizes (World Population: Growth & Trends). This is the stage when birth rates and death rates are high and even then there is no population growth. High birth rate is due to high fertility rate or no use of contraceptives. Similarly, high death rate during the stage is attributable to the deaths occurring from the deadly diseases such as plague, cholera, typhoid as medical science was not developed enough to provide required protection. This is a preindustrial stage when living conditions are not favorable. Infant mortality goes down due to improved health conditions that in turn, bring down the death rate; however, the birth rates still remains high keeping the population growth rate at high levels. This is also known as the transitional stage and most of the developing world is found in this stage. The country develops economically and the people start using contraceptives that controls the birth rates significantly. Population growth rate in this stage falls down significantly. Most of the developed world and a few developing countries can be found here. From the equation above, it is amply clear that if the death rate equals birth rate, there will be no growth in population of the country. In other words, if the death rate declines, the birth rate must decline by the same rate for the population to achieve stabilization. With the advances in medical sciences; better nutrition, enhanced sanitation and clean water, the death rates have declined substantially in last several decades; however, the birth rates have not kept pace with the death rates resulting into positive population

The Social Concept in Terms of Culture and Norms Research Paper

The Social Concept in Terms of Culture and Norms - Research Paper Example To begin with, it is imperative to define the exact nature and importance of these strategies in the context of the concert hall. Interpretive strategies spring from that aspect of a field’s study which seeks to define the same in the context of an individual’s life and link the same with various factors at a regional, international and global level. (Norberg - Schulz,1996; P 414 – 428) The role of an interpretive strategy in the case of the two concert halls discussed here is to bring out a variety of features in the structural implications of the building. These features have been further discussed below. One of the major features of an interpretive strategy lies in its ability to transform a space and transport an individual to a place beyond the structure where the building and the individual in question are in perfect tandem as far as everyday activities and a sense of drama in this everyday life are concerned. This has been termed as Hermeneutics. (Hale, 20 00; P 213 – 233) On a more technical grid, the term hermeneutics adheres to the play of a person’s sense of aesthetics when regarding the two concert halls discussed in this paper. The finer point shows that the hermeneutic tradition helps create a platform where a person may experience the concert hall as an extension of his or her daily living. This is an important point made by the term ‘modern aesthetics’, which cater to more than a marriage of fine art and engineering for positive structural implications in the concert hall.

Christianity Essay Example for Free

Christianity Essay Followers of Jesus, a Jewish man, started a new religion, Christianity. Christianity started to grow during the Pax Romana, a period of peace in Rome. The Pax Romana lasted from 27 B. C. E to 180 C. E. and during it government improved, literature prospered, engineering improved, and laws formed. The peace during the Pax Romana provided a time for Christianity to rise. Christianity spread rapidly and successfully in the 1st through 3rd centuries because it appealed to many people, missionaries could easily travel and spread the message, and because of the events taking place in Rome. The Christian message, a universal message, appealed to many people. In the Sermon on the Mount, the only full sermon existing from Jesus, a section called â€Å"The Beatitudes† lists all of the blessed people. Jesus blessed the oppressed, the hungry, the merciful, the peacemakers, and the pure in heart in his sermon. The Christian message of hope appealed to those out of power and suffering under the rule of the Roman authority, because the Christian message gave people hope and a thought of salvation. The Sermon on the Mount, given by Jesus, encompasses the Christian message of hope. In addition because of the simplicity and directness of the Christian message, people could easily catch on to the message. In addition to those suppressed by the Roman government, Christianity also appealed to gentiles, non-Jews. Paul, a missionary, preached Christianity to the gentiles and compromised with them. Originally following the strict rules such as circumcision and eating Kosher showed to be a roadblock to the gentiles. Paul and Peter argued over whether or not the gentiles should have to follow these rules, and Paul won, so the gentiles that converted to Christianity did not have to adhere to any rules of dress, eating Kosher, or being circumcised. This allowed for Christianity to appeal to the gentiles. Christianity also appealed to widows. In Roman Civilization those that had been widowed had a low place in the social hierarchy and people looked down on them. However, in Christianity widows were honored and called brides of Christ. The charity work that the Christians did also made Christianity an appealing religion. Christians set up hospitals for the poor and homeless. Hospitals gave the homeless a place to become comfortable before they died. In addition to the charity work that Christians did, Christianity emphasized peace, love, and brotherhood, which appealed to some. In the 1st-3rd centuries C. E. the message of Christianity could also be spread quite easily throughout the Roman Empire. The 200,000 miles of roads built in Rome helped Christianity spread throughout the entire empire. The roads allowed for missionaries to travel throughout the empire easily so that they could spread and preach Christianity. The Pax Romana, a period of peace, also allowed for the roads to be safe for the missionaries to travel and spread the word without the fear of being attacked. The many different cities helped spread Christianity rapidly because of the great amount of people in a small area. In addition Christianity could catch on faster and reach more people. Missionaries also had an easy time getting across the message because of the use of only two languages. In the eastern half of the Roman Empire the people mainly spoke koine Greek, and in the western portion of the Roman Empire the people mostly spoke Latin. Because no language barrier existed, missionaries could spread Christianity with fewer difficulties. The events taking place in Rome helped the Christian message to spread rapidly and successfully. The old Roman religions started losing their vitality setting the stage for new beliefs and giving way to the rise of Christianity. Unlike other cults, like the cult of Isis or Mithras, Christianity was freer and adaptable. The loosely organized internal structure of Christianity allowed for Christianity to adapt to people. The persecution of Christians led to the organization of Christian ideas and thoughts. The persecution of the first Christians led to the idea that the ideas of Christianity should be written down and organized. The two groups of Christians, the Apostolics and the Gnostics, had similar but different views on Christianity. Irenaeus, an Apostolic Christian, wrote the first book of the Christian Church titled Against the Heresies. Irenaeus thought that the Gnostics did not represent the true teachings of Jesus, and that the Apostolic Christians represented the teachings of Jesus more than the Gnostics. The Apostolic view of Christianity became the mainstream Christian view and people recorded the Apostolic ideas in the Bible. The persecution on Christians led to the spread of the message of what the Christians died for. Christianity spread due to many factors including roads, missionaries, and the honoring of widows. The timing of the rise of Christianity helped Christianity spread and rise rapidly and successfully. The period of peace in Rome, the Pax Romana, helped Christianity flourish. Christianity at this time grew as older Roman religions started to decline, missionaries preached Christianity to many people, and the Christian message of hope gave hope to those who needed it. These factors along with the rise of Christianity during the Pax Romana helped Christianity spread and continue throughout the Byzantine Empire and beyond.

Impact Of Virtual Reality On The Society Media Essay

Impact Of Virtual Reality On The Society Media Essay Despite the disagreement Virtual Reality has awakened the world in enormous ways and the society should not stay dubious of the tremendous potentials it has to bring in an optimistic way a large technological development. The word virtual shares its root with virtue, a word whose original meaning denoted strength. More recently, virtual has come to describe something that possesses essence and effect without possessing form, something not quite physical, but with a measurable impact on the real. Thats certainly true of virtual worlds. Virtual reality is turning out to be the topic with many opposing viewpoints. It has become the focal point of discussion among the general public for several reasons. Conceivably, this is mostly because of all the potentials which virtual reality develops (Hoffman, 2004). However, despite the disagreement this new technology has awakened, society should not stay dubious. Virtual reality if used in an optimistic way can bring a large technological development. Military and space technology, the entertainment industry, and the physical sciences contributed to the drive to make advanced computers user friendly. Initially, complex simulators presented low-definition displays through binocular headsets. Addition of position sensors introduced motion parallax, with depth cues that created the illusion of being within a three-dimensional graphical display. The invention of a `DataGlove, whose movements could be sensed by the computer and then reconstructed in the display, enabled the observer and computer to interact with instructions given by the observer via simple hand movements such as pointing. The overall effect was that the observer experienced a computer-generated artificial or virtual reality (VR), whose credibility depended largely on the agreement between the simulated imagery and the familiar sensible world (Zimmer, 2004). Societal Impacts of VR Virtual reality applications are finding their way into the mainstream of society. Initially, the use of VR (virtual reality) was seen as valuable only to scientists and engineers whose highly specialized needs more than overcame the poor quality of the computer generated 3D images. For example, scientists can engage in molecular research by moving within molecules to examine their structures. Doctors and other medical personnel can practice elaborate or dangerous procedures before attempting them on human subjects. With special imaging software, the experience can take place on a virtual done of the patient awaiting surgery in the next room. Doctors can control a microscopic, mechanical, seeing-eye arm, through the body which can lead to better diagnoses even on patients thousands of miles away (Zimmer, 2004). Immersive virtual reality pain distraction was originated and developed by Hoffman Patterson at the Univ. of Washington Seattle and Harborview Burn Center. Source: (Hoffman H. ) Formerly, virtual reality was known as nothing but a diminutive stride ahead of video games. However, it is now understandable that this technology can be used for more realistic purposes. These purposes embrace national defense, medicinal and surgical measures and a variety of other functions. Society has not completely recognized the benefits of virtual reality as of yet because it is still under progress. The basis for virtual reality enduring in its growth for so long is mostly due to its intricacy (Riva, Mantovani, Capideville, 2007). Oddly, even though much has been printed about the possible societal impact of other rising technologies, such as genetic production and cyborgization, comparatively very less has been penned down about the impact of VR on the society (Calvert, 2002). In my point of view this may be because people may believe they already have witnessed VR, through portrayal of VR on television and cinema; the worlds of genetic production and cyborgization are less common, and yet seem proficient to transform the very concept of  ¿Ã‚ ½humans ¿Ã‚ ½ (Lang, 1996). If this is why researchers have given reduced attention to VR, this position has resulted from erroneous philosophy (Zimmer, 2004). Virtual reality has the prospective to intensely modify human society, not by destabilizing our corporeal corpse (as genetic production or cyborgization may), but by changing our insight and relations. Other medical breakthroughs have occurred when humans use specially designed hardware in virtual worlds. Two of the hardware pieces specifically are a data glove and a body suit. The data glove fits the hand and has tiny sensors that record and transmit data about even the smallest movements of the fingers, hand, and wrist (Riva, 2005). Doctors have been able to use this information to identify and evaluate neuromuscular diseases of the hands. The data suit collects information about the human torso or even the entire body. With it, scientists can help individuals who have experienced leg traumas to learn to walk again. One researcher has even noted that disabled kids may someday engage in virtual rugby (Anderson Bushman, 2001). The menu of VR-experiences from which a patient might choose is limited by the capacity of the computer to generate accurate representations, by the skill of the designer, and by the preferences of the supervising clinician. Although the patient may choose from within that menu, choice is necessarily more constrained than in daily life. Restriction of choice in this way carries considerable potential for abuse. At one level VR becomes a terrifying instrument of torture, at another a powerful means of education (Wiederhold Wiederhold, 2005). Fundamentally, the experiences generated are limited to those that man can design; the meanings a patient might attribute to them need not agree with those presumed by the VR designer. It would be irresponsible to introduce patients to a world that contains no more significance or deeper meaning than that which man can construct. For patients seeking to understand, as many do, the purpose of their suffering, VR is as unlikely as hallucinogenic dr ug use to provide access to a deeper reality in their search for meaning (Anderson Bushman, 2001). Another early application of VR was in training people for hazardous real-life occupations. Firefighters, for example, can practice fighting fires and searching for trapped victims. Even more cutting edge is wearing a body suit that controls the movements of a robotic firefighter who can travel into severe heat and see through dense smoke to rescue an unconscious person. Exploring volcanoes is a third example of how virtual reality is changing our world. For obvious reasons, it is not safe to send trained volcanic experts into live volcanoes. However, it is possible to send a virtually controlled robot into the danger to send back digital images for further study (Wiederhold Wiederhold, 2005). In a virtual world, lifelike avatars can study and perhaps interact with the holographic display of a humanoid robot More recently, VR has worked its way even beyond these initial applications into the workplace, school, and home. Commercial applications include product design that is more efficient, requires less travel time, and less money to develop. Entire buildings can be created and displayed for preconstruction walk-through. On a larger scale, the University of Washington has even created a virtual Seattle. Developers can examine and evaluate fuel flows in a rocket booster tank during a simulated launch (Zimmer, 2004). The aircraft industry can create new models and virtually experience instrumentation layout, seating arrangements, and emergency pathways. Now advertising agencies have developed virtual tours and objects to promote their products. Tourist attractions can share parts of their offerings from clear snorkeling waters to high-speed roller coasters to help entice travelers at home or in a travel agency. Auto manufacturers can put the prospective buyer in their automobiles on the World Wide Web while the customer is still at home (Hoffman, 2004). Virtual 3-D factories facilitate experimentation with manufacturing processes and can expedite the training of workers Government entities which previously might have used virtual reality only to simulate military maneuvers now might promote national treasures. Tank and submarine commanders benefit particularly from VR because the head mounted displays are very similar to looking through a periscope. Recently, the Smithsonian Institutions Museum of Natural History created a virtual museum tour on the Internet with the help of a team of educators at Mississippi State University. Schools have benefited from virtual reality field trips and experiments (Riva, Mantovani, Capideville, 2007). Whether the students are learning in public, private, or home school environments, they can engage in learning as never before. They can feel the effects of gravity as they walk on the moon, explore deep sea caverns, get face to face with beasts on a safari, or even touch the delicate rain forests creatures and vegetation. Students can also travel through virtual time. They can sit in on the signing of the Declaration of Independence, march through Atlanta with Dr. Martin Luther King, or trade flaming arrows with King Arthur (Cassidy Rimbeaux, 1994). Entertainment is drastically changing with virtual reality. Video games are more sophisticated and true to life from competing in the giant slalom at the Olympic Games with Tommy Moe or Picabo Street to driving in the Indianapolis 500 with the Unser family to competing for Top Gun with Tom Cruise (Gross Levenson, 1995). Several years ago, Juggling for the Complete Klutz; was published. It helped some people, but not everyone who wanted to be a clown. The missing element, now available with VR, was to slow down the action by reducing the effects of gravity. Later as the user becomes proficient, the gravity levels can be increased until they are back to Earth levels. My personal favorite though is Dreamality Technologies Inc.s Dream Glider (Gross Levenson, 1995). Ive always wanted to hang glide, but my wife has refused to allow me to do so because of the perceived dangers. Now, just by shelling out a few bucks and strapping on a harness, I can enter a simulator and glide anywhere within a virtual environment. Each interactive ride is different because the skill of the rider determines the course and length of the flight (Zimmer, 2004). Almost as fascinating as the applications of VR, is the psychology of life in a virtual world. The behavior of humans will be quite interesting to monitor as they begin to experience a phenomena known as reality confusion. Parents will have concerns about their children at school and at home participating in digital experiences. As with most new technologies that people and the press do not understand, the prospective evils are highlighted in discussions. However, concerns like isolationism and pornography, while valid, will eventually give way to the overwhelming benefits of virtual reality to our society. Therefore the way a few of us live now might be the way a larger population will live, decades hence (Hoffman, 2004). A common question is How close is virtual reality to true reality? It is true that there is a lot more that needs to be improved and developed. To truly bring a user to a point where one is unable to distinguish between reality and virtual reality, the hardware and software must encompass more of the senses. More powerful hardware will lead to better response times for the entire experience (Lang, 1996). Visually, resolutions must be high enough to match the capabilities of the human eye. Three-dimensional sound must replace stereo sound. The sense of touch must encounter force. Perhaps taste and smell will eventually work their way into virtual environments. In reality, the applications of virtual reality will stem from human needs, not out of technological capabilities (Lang, 1996). There is a huge amount of attention being given to the psychology of those who make use of the Internet, and to the Internet ¿Ã‚ ½s superior communal insinuation. Surely, VR and its possible societal and psychosomatic penalties ought to have this type of concentration, and much more. What will VR do to humanity, and to individual psychological understanding? Answers will be given to these conjectural questions in connection to communal domains. Although the social order knows a lot about VR there is still so much that it does not contemplate. Perhaps in future, new technology will come out and public will find out more about this virtual world (Zimmer, 2004). However, until that time, the questions will stay many and doubtful however the potential is limitless. People also argue about the probable societal effects of having most individual connections happen online, in the virtual or cyber world. Supporters of VR and online world say that prospect VR and technology could modify the stature of communication, thus drawing people more close to each other (Cassidy Rimbeaux, 1994). Noted by Lang (1996):  ¿Ã‚ ½The developers of the virtual worlds have limitless opportunities to shape the scale and appearance of the world, the capabilities of its avatars, the methods of communication, and even the laws of physics (e.g., space exploration over galactic distances). It is possible to explore new experiences that are not possible in any other medium ¿Ã‚ ½ (Lang, 1996). In 1999, Burger King conducted a focus group to tour a new store concepta 3,300-square-foot 50s-style diner. What made it unusual was that the group never left their seats, and the store didnt exist. The technology that made it possible-3-D computer-assisted design (CAD) brings a new dimension to standard CAD applications, which designers have used for more than a decade to sketch store plans electronically. 3-D takes that process a step further by offering a new perspective, thus making it easier to picture shelf sets and giving clients more input at an earlier stage in the design process (Zimmer, 2004). 3-D helps designers communicate better with store owners. Frequently, building owners arent comfortable with reading 2-D construction documents and may not fully understand the design. This causes costly changes late in the design or construction process. Using 3-D also helps identify errors, such as interferences between ductwork and the buildings structure, early in the design process, which eliminates costly change orders in construction and speeds the time to successful project completion (Zimmer, 2004). Electronic renderings force designers to be more objective and think about perspective. Additionally, mistakes are a matter of a mouse click. Once youve done a hand rendering, theres nothing you can do to change it. Its not a particularly responsive tool in terms of speed and revision. If somebody can see how something is going to work, they may choose a design theyd otherwise avoid. The same is true for materials. Conclusion The technology is turning out to be so complicated that public will no longer be able to differentiate whether they are in virtual or actual reality. Technology most certainly has the capability to go haywire. It is likely that VR will turn out to be a technological advancement which humans will be unable to control and will take over all of humanity. If this were the case, culture and the populace within it would turn out to be unsure if they were in virtual or actual reality. If society is clever enough to create such a technology it should be clever enough to decide and manage its penalties (Zimmer, 2004). Often times in the history, society in its entirety has been subject to decisions made by those of the inventors of new expertise. Without the direction and authority of society upon VR it could go to squander, or even turn out to be society ¿Ã‚ ½s enemy of sorts. However, in case of medical field exercises, Medical paternalism might lead to premature and ill-judged clinical applications of VR. Without professional self-regulation, abuse by experimentalists and inept therapists seems only too likely. A VR machine may be developed, for clinically justifiable purposes, to treat phobias or help establish adaptive coping behaviors in response to stress. No matter how much humanity is responsive of virtual reality, the individual mind still has instincts that cannot be forbidden. That is one of the disadvantages of VR. That no one is convinced what to anticipate. Just as the case may be with any other ability, the only way to find out the results of VR is to test the limits to which it can go. Knowing the virtual reality has the capability to influence so many people in such a big number of ways, there is a substantial need to have some kind of restraints (Gross Levenson, 1995). This brings up one more input argument as to who should be in charge of restraining this virtual world. If the government is in power it could possibly be ill-treated and mishandled. However, if society entirely is left to consider its uses, the affects could be also good or bad.

Research Proposal E Construction Dispute Model Construction Essay

Research Proposal E Construction Dispute Model Construction Essay Construction industry cannot avoid from disputes as many parties involved in one industry. All the parties insert dispute resolution mechanisms into the contract in the hope that the disputes can be avoided or solved as quickly as they can as they arise. If disputes are not managed properly, they tend to drag on and escalate to cause projects delays and ultimately ruined the relationships. There is now a wide armoury of dispute resolution methods available for resolving construction disputes. The most popular out of these being litigation and alternative dispute resolution (ADR) processes such as arbitration, mediation, and conciliation. These dispute resolution processes suffer two key disadvantages, which arise from the fact that these processes only come into play after a dispute has arisen. One disadvantage is that, during the dispute resolution process, trust between the parties may be sorely tested, or even destroyed. The other disadvantage is that the time and cost of resolvin g a dispute may affect the expected project gains of parties concerned. It is essential in construction industry to adopt an anticipative approach to management. Since disputes have been one of the major factors affecting cost and time, it is necessary to determine the classification of dispute from the construction law cases and then the e-CDM can be the tool/database to prevent the conflicts or disputes at any stages of construction. By having thorough knowledge and information in this tool/database, it will definitely help the project manager and contract manager to anticipate problems at an early stage of the project without going through any other Alternative Dispute Resolution method which will cost extra money on the top of the project cost. INTRODUCTION Malaysia has been developing rapidly in tandem and racing a head to become industrialised nation. Undoubtedly, the building and construction industry are instrumental as the driving forces to contribute towards realising this aspiration. The construction industries are expected to play a vital role by contribution of 11.2% to the gross domestic product (GDP) in 2013.  [1]  According to CIDB Chief Executive Datuk Sri Dr. Judin Abdul Karim, the construction industry is expected to secure RM 120bil worth of the project in 2013.  [2]  In order to achieve this encouraging but challenging target, the Government and the private sector must work closely together to ensure projects under the Economic Transformation Program (ETP), the Entry Point Project (EPP), project under the 5 corridors and the Greater Kuala Lumpur and Klang Valley are implemented in the timely manner to avoid any delays that would increase cost. The construction industry in Malaysia is fast growing and in light of the economy uncertainty, the world is now facing, great challenges face players in the industry. Dispute amongst parties involved in the industry are unavoidable. It would be impossible to create an environment where the industry would not be affected but great effort should be expended to minimize the effect that would be failing the industry. To do so, it is important that disputes be resolved in the most expedient and economic manner to enable parties in the industry to move forward without being badly affected. BACKGROUND STUDY Modern day construction projects vary from simple houses for individuals to complex infrastructure projects for governments. Some construction projects may even involve cross border movement of resources and not limited to the control of a single jurisdiction. A variety of factors, including, unfair allocation of risks, multiple contracts, unrealistic expectations and schedules, poorly drafted or inadequate contract documents, design omissions, tighter funding, the lack of experienced personnel, communication problems, and even the state of the economy, add to the complexity of construction projects. As a result, construction projects are a breeding ground for contractual dispute. Cooke J in Canterbury Pipe Lines Ltd v Christchurch Drainage Board  [3]  said Building contracts have been traditionally a fertile source of disputesà ¢Ã¢â€š ¬Ã‚ ¦ The enunciation aptly summarizes the very nature of construction industry as an industry notorious for complex disputes.  [4]  The primary cause of such disputes arises from inadequate legal knowledge.  [5]  Majority of construction practitioners comes from technical engineering and architectural background without adequate legal knowledge in contracts and this has led to numerous disputes in construction contracts. Lack of knowledge in construction laws by construction players has been the leading cause of dispute. Employers, Consultants and Contractors though with years of experiences in the industry are usually lacking of the legal knowledge and understanding on the operation and effects of various clauses in construction contracts in general and handling dispute. The lacking in understanding the legal and contractual aspects of contract may be caused by not having the experience to undergo the process itself or just plain ignorance of the topic overridden by over-zealous attitude of churning maximum profits and in the understanding that legal experts are there to provide all the required advice and service. Lack of knowledge in construction law will lead to wrong interpretation of contracts in which the party tends to take trivial matters to the dispute. Construction industry cannot avoid from disputes as many parties involved in one industry. All the parties insert dispute resolution mechanisms into the contract in the hope that the disputes can be avoided or solved as quickly as they can as they arise. If disputes are not managed properly, they tend to drag on and escalate to cause projects delays and ultimately ruined the relationships. Lord Denning  [6]  , when commenting on construction disputes, is quoted as saying; One of the greatest threats to cashflow is the incidence of disputes. Resolving them by litigation is frequently lengthy and expensive. Arbitration in the construction context is often as bad or worse According to Hibberd and Newman  [7]  , litigation gains an unpopular name when time goes on. They quote that A substantial majority (70%) suggested the whole system takes too long, whilst almost 30% suggested that the costs of litigation are far too high. As the litigation cannot solve dispute effectively, arbitration had been introduced. Professionals believed that arbitration can solve the problems without ignoring the main desire of clients. Most of the clients depend on those who know contract better than them. They hope these professional can help them with the lowest cost and fastest way to solve the problem. There is much truth in the old adage that prevention is better than cure. The various dispute resolution processes referred to mediation, conciliation and arbitration all suffer two particular disadvantages, which arise from the fact that these processes only come into play when a dispute has crystallized. One disadvantage is that, during the dispute resolution process, trust between the parties may be sorely tested, or even destroyed. The extent to which this occurs is likely to be proportional to the time and cost (in both money and resources) of resolving the dispute. As ongoing trust between contracting parties is such an essential ingredient of healthy and efficient project delivery, this can be a significant disadvantage in a continuing relationship such as will typically be found in a BOOT project. The longer and more acrimonious the dispute resolution process, the greater the likelihood that there will be a loss of trust in any continuing relationship. By having a readily accessible resource such as e-Construction Dispute Model (e-CDM) which the parties can access during the course of the project at any construction stages, the impact of disputes is minimized. In contrast to the dispute resolution processes earlier described, e-CDM seek to avoid or minimize the incidence of disputes by a timely, little costly and relatively informal process which takes place while the work is in progress. Used effectively, they can lead to a reinforcement and enhancement of trust, with a positive impact on the project as construction unfolds. PROBLEM STATEMENT The construction industry is notorious for high levels of conflicts and disputes. It is a project based industry with each project being unique. Some construction projects may even involve cross border movement of resources and not limited to the control of a single jurisdiction. A variety of factors, including, unfair allocation unfair allocation of risks, multiple contracts, unrealistic expectations and schedules, poorly drafted or inadequate contract documents, design omissions, tighter funding, the lack of experienced personnel, communication problems, and even the state of the economy, add to the complexity of construction projects. As a result, construction projects are a breeding ground for contractual disputes.  [8]   It could be said that the adversarial nature of the construction industry contributes to the germination and manifestation of construction disputes. As such, the construction industry has been at the forefront of the search for effective and efficient dispute resolution mechanisms. Project procurement and construction disputes are two of the major concerns in the construction industry worldwide.  [9]  There is now a wide armoury of dispute resolution methods available for resolving construction disputes. The most popular out of these being litigation and alternative dispute resolution (ADR) processes such as arbitration, mediation, and conciliation. These dispute resolution processes suffer two key disadvantages, which arise from the fact that these processes only come into play after a dispute has arisen. One disadvantage is that, during the dispute resolution process, trust between the parties may be sorely tested, or even destroyed. The other disadvantage is that the time and cost of resolving a dispute may affect the expected project gains of parties concerned. In the circumstances, the current trend is to look for methods other than processes such as litigation, arbitration, mediation, and conciliation that could be put in motion before or at least, soon after a conflict has arisen. The aim is to ensure that dispute prevention measures, or at least measures for minimizing the scope of any dispute is put in place before the parties positions have hardened. Traditionally, resolving construction disputes are done through litigation. This can be confirmed by 72 cases related to building contract being reported by the Malayan Law Journal between 1990 and 2007 and the Current Law Journal which reported about 200 cases of construction related issues since 2004.  [10]  Yet, today the litigation procedures have fallen into disrepute, particularly due to excessive costs, delays, procedural complexity and adversarial approach.  [11]  The earlier research have come out with the new approach by developing eDR model but it only focus on on contractual variations  [12]  in construction projects. The lacking of law knowledge in every term of contact still needs to be addressed. It is essential in construction industry to adopt an anticipative approach to management. Since disputes have been one of the major factors affecting cost and time, it is necessary to determine the classification of dispute from the construction law cases and then the e-CDM can be the tool/database to prevent the conflicts or disputes at any stages of construction. By having thorough knowledge and information in this tool/database, it will definitely help the project manager and contract manager to anticipate problems at an early stage of the project without going through any other Alternative Dispute Resolution method which will cost extra money on the top of the project cost. RESEARCH OBJECTIVE The objective of this study are: To classification the types of dispute in the Malaysian construction industry base on the related law cases; To develop an e-CDM model as the database for construction industry; and To develop an application of e-CDP prototype/system based on types of the disputes, the parties involved, type of the project, when do the disputes occurred, and standard form of contract for the project. RESEARCH AIM The research has highlighted the problem statements on poor understanding of contract administration and lack of contractual knowledge toward the most litigious issue in construction. Therefore, the aim of this research is to classify the types of dispute based on related law cases in construction and subsequently propose and develop eCDM tool/database on construction disputes as an alternative way for resolving disputes in construction projects. SCOPE OF STUDIES This research is limited to the following:- a) To construction disputes reported by Malayan Law Journal. b) Cases related to Building Contract in Malaysia. RESEARCH METHODOLOGY Briefly, this research will be carried out with five (5) different stages: Identifying the research issue Literature review Data and information collection Data and information collection Research analysis Data and information collection Conclusion and recommendations Data and information collection Identifying the Research Issue Identifying the research issue is the very initial stage from the whole research. Initial literature review was done in order to obtain the overview of the particular research topic. In identifying the issue, firstly, it will involves reading on various sources of published materials such as journals, articles, seminar papers, cases, previous research papers, or other related research materials, newspapers, magazines and electronic resources as well as World Wide Web and online e-databases from UM librarys website.  [13]  At the same time, discussions with supervisors, lecturers, as well as course mates have been done to gain more ideas and knowledge relating to the topic. Literature Review The second stage in executing a research is literature review. Literature review stage is basically a stage when the researcher will be reading and also need to criticize on each and every material that has been read. Published resources, like books, journals, varies standard form of contract and related statutory are the most helpful sources in this stage. Literature review also will be involving the collection of documents from the secondary data research, such as books, journals, newspapers.  [14]   Data and Information Collection This stage is data and information collection stage. This is an important stage towards achieving the objectives of this research. In this stage, the further action is to collect the relevant information based on the secondary data from the published resources. Lexis-Nexis database which provides cases of Malayan Law Journal is the main sources in getting the related cases. Research Analysis During this stage, all of the data collected data, information, ideas, opinions and comments were specifically arranged, analyze and also will be interpreted based on the literature view which will be carried out. This stage also could be called as the heart of the research as from this chapter; we can see how the objective has been achieved. Conclusion and recommendations Conclusion and recommendations is the final stage of the research. In this stage the findings will be able to show the result of the research. A conclusion needs to be drawn in-line with the objectives of the research. At the same time, some appropriate recommendations related to the problems will be made for a better solution in relation to the said problem. CONCLUSION Disputes between parties to construction projects are of great concern to the industry; nevertheless, the subject is dominated by anecdote and hearsay. The study of construction industry disputes, and the causes of those disputes, is essential. In fact, it would seem that effective management action can be taken only if based on reliable evidence and as contract manager it is essential for them to consider all kinds of dispute in construction industry.

Native American Essay -- Essays Papers

Native American The story of the pilgrims and Native Americans was always taught in elementary school during the Thanksgiving holiday. The teachers frequently called Native Americans â€Å"Indians†. It never crossed my mind that the word â€Å"Indians† was the politically incorrect way of labeling Native Americans until a student shouted it out to the teacher in 5th grade. It finally clicked in my mind that Indians are people from India not America. Native Americans were always portrayed to be accepting culture when confronted with the Europeans during Thanksgiving. In elementary school, everything is happy. I don’t even remember learning American history. Columbus sailed the ocean blue, thought he was in India, and started the trend of labeling Native Americans as â€Å"Indians†. In junior high school, I learned more about the Native American’s view on the colonization of America. They were people who were forced out of their land to make room for European settlements. Most Native American tribes were at war with the incoming settlers. Native Americans are people who celebrate and wor...

Romeo And Juliets Fate :: essays research papers

William Shakespeare wrote many great plays in his day. His tale of Romeo and Juliet portrays a tragic love. This play ends with the deaths of the key characters Romeo and Juliet, because of their forbidden love. Many factors contribute to their demise. The scene of when they first meet, the fight between Tybalt and Mercutio, and the final death scene all reveal why the two of them cannot be together in the end. Romeo and Juliet are ultimately killed because of their decisions and fate. The effects of Romeo and Juliet’s decisions and fate are first apparent in the scene when they first come together. When Romeo says to Juliet in the Capulet party, "Thus from my lips, by thine my sin is purged" (I,v,108), and then he kisses her, it obviously exhibitions how they exercise their choice to love each other. After discovering each other’s identities, Romeo proclaims, "My life is my foe’s debt" (I,v,119), and Juliet states, "My only love sprung from my only hate" (I,v,140). These lines foreshadow that there will be many impediments keeping them apart and eventually killing them both. It might be thought that the tragic ending is caused by them choosing to love each other. However, if fate does not bring them together in the first place, they will never have the opportunity to establish their love. Romeo and Juliet are affected by their choices and fate right from the beginning. Romeo’s actions and chance also cause the chaos in Romeo and Mercutio’s fight scene with Tybalt. When Romeo replies to Tybalt when he is first insulted and threatened on the street, "I do protest I never injure thee, but love thee better than thou canst devise" (III,I,67-8), it means he does not mean Tybalt any harm and is walking away from the fight. Then, Mercutio steps in for Romeo and starts fighting with Tybalt. Romeo gets between them, which allows Tybalt to kill Mercutio, and later results in Romeo killing Tybalt. It is very easy to point the finger at Romeo and accuse him of allowing Mercutio to be killed. His decision directly allows Tybalt to stab Mercutio, but he is trying work it out so no one will be injured, like peer mediation. Although he has no clue that he will do more harm, Romeo is actually trying to help. That’s where fate affects him. Also, it can be said that Romeo is entirely responsible for killing Tybalt.

THE MAN :: essays research papers

The Man They Called Danny -------------------------------------------------------------------------------- To the millions who watched his story unfold, slain reporter Daniel Pearl was a symbol of loss and national grief. To those who knew him, he was much more. -------------------------------------------------------------------------------- by Felicity Barringer Sidebar: Why Reporters Risk It Related Site: Wall Street Journal The Daniel Pearl Foundation THE FILE "JOURNALIST1" on my computer, created after the war in Afghanistan began, is a disjointed record of the fears and losses of the last several months. It begins with notes about journalists in Afghanistan and the dangers they face. It was open when the father of John Tipping II, a firefighter who died in the World Trade Center, called to talk about his son for a thumbnail portrait in the New York Times. So it continued with notes about a fireman. The same file was on my screen January 24 when a call came from Steven Goldstein, Dow Jones?s corporate spokesman. He told me that Daniel Pearl, the Wall Street Journal?s South Asia bureau chief, was missing. ?Journalist1?? soon filled with notes about Daniel Pearl?s work and his life and details that reflected the painful uncertainty about his fate. Finally, it recorded the even more painful certainty: Pearl?s death at the hands of Pakistani kidnappers. A videotape sent to the American Embassy a month after his capture showed a knife wound near his heart, evidence of his gruesome execution. The kidnappers then videotaped the mutilation of his body. The prolonged uncertainty, the geopolitical importance of a crime calculated to embarrass Pakistan?s president as he aligned himself with the United States and, finally, the kidnapping?s barbaric conclusion, guaranteed an audience of millions. Many of these became captivated by the man they called ?Danny.? His smile was beguiling, a lighthearted challenge to any person or institution that took itself too seriously. His eclectic embrace of people and ideas led him into journalism, into myriad friendships, into all kinds of music and into marriage with a French citizen whose blithe spirit mirrored his own. It is no surprise that he is better known than the other journalists in the ?Journalist1?? file, better known than John Tipping II and most of those killed on September 11. The country and the world mourned, hard, for the thousands who died that day, and for all that was lost with them. But people did not just mourn Daniel Pearl. They claimed him for their own. When word of Pearl?s death was broadcast on February 21, Vera Katz started scrambling around her home in Venice, Calif.

Corruption in Malaysia

I have oral test with my group on next weak and I have found this text on internet? Composition of Forum Example Essay Title: Corruption Chairman of the Forum: greetings. The teachers and classmates. As of this morning we are thankful for another opportunity to discuss social problems which I think is more chronic in the absence of drastic measures taken to address them. Without delay time, let me introduce the panel members, which left me was his right split B and C are the relative Title of the forum this morning is â€Å"the problem of corruption inMalaysia. † Next, I call our first panel, the relative B provides definitions of corruption and its characteristics. Brother B: hi and thank you chairman. Web-based anti-corruption commission (MAC), corruption is an act that involves giving and receiving of money or specific goods with intent to prevent the action taken or receive privileges. Corrupt practices involving all levels of society whether in public or private sector. W hich kind of support will be in the form of material, such as money, cars and houses, and forms of entertainment such as women.Brother C: According to the Prime Minister, Dates Series Abdullah Madam Bawd described the corruption as a cancer and if left unchecked will cause a government collapse and thereby tarnish the image in the eyes of the international. Chairman: We have been clear on the issue of corruption. Now what are the opinions of our panel members about the causes of corruption? Brother B: My chairman. Let me put in a bit. The main cause is peer influence. When I saw my colleagues being corrupt and enjoy the luxuries of life without any action, a person would be tempted to accept bribes.Stress at work is able to interfere with feelings, especially if senior officers were also involved. Without thinking, one that will be easily affected and were corrupt because they want to quickly enjoy the luxury of living in this mortal world. Chairman: C Maybe you want to add an opini on on the cause of corruption? Brother C: Chairman, I agree with you B. In addition, the law in our country are causing many poor people are not afraid of the punishment imposed.For example, legal action is considered a light punishment to the culprits of corruption as impaired with the number of corruption are taken by them have given a negative outlook on the capabilities of our Judicial system to address this issue. In addition, the lighter sentence is said to be motivated to certain parties to take the risk of corruption because the recipient is aware that coffee money they are able to enjoy Chairman: Thank you C, I hope we can all work together to prevent corruption and do not embarkation rooted in the minds of the people of Malaysia. Moreover, the problem is more serious.What is his relation to B steps to overcome? Brother B: Government should Meghan attitude of civil servants and the private for more trust and responsibility. The slogan â€Å"Clean, Efficient and Trustworthy † introduced by former Prime Minister Tuna Dry. Empathic Mohammad should be embraced by all public and private sector. Service counters have been introduced in all government offices to avoid the practice of giving and receiving â€Å"coffee money. † Bureaucracy should also be reduced or eliminated to create more efficient and effective. This was never raised by the Honorable Prime Minister in his speech in Parliament recently.Chairman: Thank you B. It appears that you have something to C is pronounced. Please. Brother C: The government should enforce laws for the public aware of how dangerous and serious problem of corruption, if not eradicated, and are confined to national security. Penalties are more severe Jail terms provided in the Anti- Corruption Commission (MAC) 2009 Parliament passed the new recently slogan can be daunting. The court also suggested that the maximum punishment. More power to act against people who refuse to cooperate den the MAC also can change the attitude of the hemp that has refused to cooperate.Whistler's should be rewarded. They should also get protection from the authorities. Chairman: Thank you C, and I think we are at the end of the forum. In summary, I think the problem of corruption in our country is a serious problem and needs to be addressed immediately. Therefore, I urge all parties to helping the government address this problem. In addition, let me express my gratitude to the highest members of the panel. However, what could I do not allow us time to talk further. Thank you. Is there any wrong word or sentences in this essays? Please help me.. BTW I'm from Malaysia

Embedding and Extracting of Secret Data

BLOCK DIAGRAM 3.1 TRANSMITTER Section In Transmitter subdivision there are 3 parts: com/aaimagestore/essays/1863648.001.png"/> Figure 1 The block diagram Transmitter subdivision In Transmitter subdivision there are 3 parts:Input screen ImagesEncoder subdivisionOutput Stego ImageThe screen image used for the proposed strategy to be taken as an input Original screen Image which is used for implanting secret informations in it. Encoder unit is composed of Generation map and secret keys. Encoder determines whether it is smooth country or edged country depending upon the threshold value. In smooth country little figure of spots implanting compared to inch country. Finally at the sender subdivision Stego image is generated which is a combination of secret keys and screen images. 3.2 RECEIVER Section Figure 2 The block diagram Receiver subdivision In Receiver subdivision there are 3 parts:Input Stego ImagesDecoder subdivisionOutput Cover ImageThe Stego Image is taken as an input to the receiver side. The Stego image is decoded right by utilizing secret keys and coevals map to obtain the screen image. The secret keys used in both the sender and receiver side are same. Pixels in the border countries are embedded by Q-bit of secret informations with a larger value of Q than that of pels placed in smooth countries. Chapter 4 PROJECT METHODOLOGY 4.1The proposed adaptative strategy There are five secret keys viz. R1, R2, v1, v2, T and 1 6 v1, 1 6 v2, ( v1 + v2 ) & lt ; 6. The mean different values of a four-pixel block are utilized to sort the block as a smooth country or an edge country. The scope of mean different value is partitioned into two different degrees, smooth degree and border degree. Q-bit of the secret information is embedded in Pixels located in the block, where Q is decided by the degree in which the norm different values belong to. In the implanting procedure of secret informations, harmonizing to the secret keys v1 and v2, the smooth degree will utilize lower value v1 while the border degree uses greater value v1 + v2. The information embedding procedure is given in Section 2.1.1 and the extracting stage is described in Section 2.1.2. 2.1.1. The implanting stage in proposed adaptative method The original image is separated into non- overlapping four-pixel blocks. For each block, there are four neighboring pels ‘Pi, j’ ; ‘Pi, j+1’ ; ‘Pi+1, j’ ; ’ Pi+1, j+1’ and their corresponding grey values are y0, y1, y2, y3, severally. The undermentioned flow chart shows elaborate working of implanting stage in proposed adaptative strategy The elaborate embedding stairss are as follows. Measure 1: Generate Two sets Kr and Kc utilizing threshold Hr ( R1, v1 ) and Hc ( R2, v2 ) , severally. Via sets Kr and Kc form a discrepancy of a Cartesian merchandise viz. , Kr _ Kc. Set Kr _ Kc generates an ordered set of combinations of Kr and Kc with 2v1 †¢ 2v2 = 2v1+v2 elements ( Eq. ( 1 ) ) . Kr*Kc = { Kria†Ã¢â‚¬Å¡a†Ã¢â‚¬Å¡Kcja†Ã¢â‚¬Å¡ , Kri ˆ Kr, Kcj ˆ Kc, i=1,2,3†¦ .} =1, 2, 3†¦ ...†¦ ( 1 ) Measure 2: Calculate the mean difference value D, Which is determined by †¦ . ( 2 ) Where ymin is ymin=min { y0, y1, y2, y3 } Measure 3: Using Threshold T and D find smooth block, Edge block and mistake block. i.e. a ) If D & lt ; =T, D belongs to Smooth block. B ) If D & gt ; T, D belongs to Edge block. degree Celsius ) If D & lt ; =T and ( ymax- ymin ) & gt ; 2*T+2, D belongs to Error block. Measure 4: Repeat measure 3 for full image Measure 5: Capacity= ( ( border block* ( v1+v2 ) ) + smooth block*v1 ) ) *4 Measure 6: For smooth block obtain I utilizing Kr & A ; Secret informations and find‘d’ . For border block: – d=? ( i-1 ) +j†¦ . ( 3 ) For smooth block: – d= I†¦ .. ( 4 ) Measure 7: Create pel group utilizing ‘n=2^Q’ . degree Fahrenheit ( Lolo ) =yi mod n+1 †¦ . ( 5 ) Measure 8: Using pel group embed the Secrets spots Measure 9: If No Of Secret Data=Capacity, travel to step 10 else measure 6. Measure 10: Apply mistake cut downing process for minimising perceptual deformation between screen & A ; stego image. Example: – Assume we have a block part with 4 neighboring pel values ( 210, 237, 198, and 183 ) , and the secret information informations for implanting in original image are ‘10010101110000111010’ . Suppose v1 = 2, v2 = 3, R1 = 257, R2 = 36 and T = 25. Here first coevals map Kr= { 000,100,010,011,001,110,101,111 } is created by utilizing Hr ( R1, V1 ) i.e. Hr ( 257,2 ) and 2nd coevals map Kc = { 01,11,10,00 } is generated by utilizing Hc ( R2, V2 ) i.e. Hc ( 36,3 ) , after that by utilizing equation ( 2 ) calculate the mean different value ‘D’ = ( 96/3 ) =32 which is greater than threshold value T, so the present block has been positioned in border country and is embedded Q = 5 Numberss of spots of secret informations in each peculiar pel. Hence, sum entire 4 * 5 = 20 spots are embedded in given block. Here for first pel into the block, e.g. y0 = 210, the initial part of secret informations ’10010’ is split into the two sub-strings ‘100’ and ‘10’ . Then, we get one = 2 and j = 3 because the 6th constituent of Kr is ‘100’ and 4th constituent of Kc is ‘10’ . Harmonizing to equation ( 3 ) , we compute‘d’ utilizing 8 * ( 2–1 ) +3 = 11. After that, the pel group ‘G’ is formed for the pel value y0 = 210 with n == 32. Here g 19= 210. Finally, the stego-pixel y`0 can be achieve from the dth component of G, i.e. y`0 = g24 = 202. Likewise we can happen leftover stego-pixel y`1 = 249, y`2 = 201, y`3 = 185 and therefore stego-block ( 202,249,201,185 ) is achieved. After using readjusts process we get concluding stego-block ( 202, 241, 201, and 185 ) . 2.1.2The pull outing stage in proposed adaptative strategy Like the implanting procedure, Partition the stego-image into four-pixel blocks. The undermentioned flow chart for pull outing informations from stego image in proposed adaptative strategy explains elaborate working flow The undermentioned stairss are executed to pull out the secret information. Measure 1: Input signal Stego Image, Secret keys R1, R2, v1, v2, T Step2: Generate Kr & A ; Kc Using R1, R2, v1, v2 Step3: Initialize i=0 & A ; j=0 Measure 4: if I & lt ; =M & A ; j & lt ; =N, travel to step 5 else halt. Measure 5: Calculate Average Diff ‘D’ utilizing combining weight. ( 2 ) Measure 6: Exploitation Threshold ‘T’ and ‘D’ find smooth block, Edge block and mistake block. i.e. a ) If D & lt ; =T, D belongs to Smooth block. B ) If D & gt ; T, D belongs to Edge block. degree Celsius ) If D & lt ; =T and ( ymax-ymin ) & gt ; 2*T+2, D belongs to Error block. Measure 7: Create pel group utilizing n=2^Q and degree Fahrenheit ( Lolo ) =yi mod n+1 Measure 8: Determine place information‘d’ . Measure 9: From‘d’ extract secret informations. Example For case, we extract the implanting illustration ( 151, 88, 193, and 133 ) , which is shown in the before subdivision. Assume v1 = 2, v2 = 3, R1 = 257, R2 = 36 and T = 25. The coevals map Kr = { 001, 110,101,010,111,100,011,000 } is formed by utilizing Hr ( R1, V1 ) i.e. Hr ( 257,2 ) and Kc = { 00,10,11,01 } by utilizing Hc ( R2, V2 ) i.e. ( 36,3 ) are produced. Here D & gt ; T, hence this block is placed in edge country and hence Q = v1 + v2 = 3 + 2 = 5 spots have embedded into each Pixel in the block. In present block sum, 4 †¢ 5 = 20 spots are embedded. Let us see 3rd pel into the block ( e.g. y â€Å" 2 = 202 ) . The pel group G is created for value 202 via Eq. ( 5 ) With n = 32. We create the variant Cartesian merchandise Kr _ Kc, which is value 202 with n = 22+3= 32. The place of stego-pixel 202 in G is 1, because vitamin D = ( 202 mod 32 ) + 1 = 3. The piece of binary secret informations ‘00001’ can be extracted because ‘00001’ is the 3rd constituent of Kr _ Kc. In the same manner, has extracted the secret information subdivision ‘10010’ for Yâ€Å"0, ‘10111’ for Yâ€Å"1and ‘11010’ for Yâ€Å"3. Finally we achieve ‘10010101110000111010’ which is the similar secret information informations in the implanting illustration of before subdivision.

GIS – Harrow

For my report I've chosen 4 GIS maps from the Harrow council's official website (to make the results more reliable) that show the differentiation between the standards of living across the London borough of Harrow. The GIS maps that I chose (and copied as evidence) include: population density, life expectancy, street crime, and income levels; I have analysed them and described what the variations in each map are and what they show us. To conclude my report I have compared the variations in all the maps, and described what they show us. This map shows the main wards in the borough of Harrow. Pop. Density This map (see above) shows the population density levels in wards across Harrow. The map shows us that there is a mix of both high and low population density levels across the borough. The north east and west of the borough is the most sparsest, as it's got the lowest amount of people per hectare- 5-less than 40 people and 40-less than 55 High per hectare. Population density levels are more concentrated in the centre of the borough, where wards like Wealdstone, headstone north, Kenton west, and Marlborough are located, with equally high density levels spreading towards the south of the borough-towards the south east, where high pop. density levels are also highly concentrated, Kenton east is situated there. The south west of the borough has more of a mix of pop. density levels, as they're between mostly 40-less than 50 people per hectare, and 83-less than 107 people per hectare. (Wards like Roxbourne, and West Harrow which are situated in the south west of the borough have higher population density levels). Life expectancy This map (see above) shows the life expectancy levels in wards, across Harrow. The map shows us that the life expectancy levels across the borough are generally low- they're mostly around 78.5 years to less than 80 years, and 80 years to less than 81 years. The map shows us that generally the centre of the borough has got the lowest life expectancy levels in the borough, with a life expectancy of 76-less than 78.5 years and 78.5-less than 80 years. The areas with the highest life expectancies in the borough are the far north east where Cannons is located, with a high life expectancy of 81.5-less than 83 years, and the far south east, where Edgware is located, with a life expectancy of 81-less than 81.5 years. In general, I think that the graph shows us that the west-north /west of the borough has got the highest life expectancy, with mostly a life expectancy of 81.5-less than 83 years; the north-west has got a high life expectancy of 81-less than 81.5 years. Street crime-darker area=more street crime This map (see above) shows the levels of street crime in wards, across Harrow. The map shows us that generally, fairly high levels of street crime are quite widely dispersed across the borough, the fact that there is no legend available for this map makes it less reliable. The centre of the borough seems to have the most amount of street crime, as generally, there're darker areas are more concentrated, with Greenhill in the south having the highest level of crime as it is the darkest area. The whole of the eastern section of the borough also seems to have a high indicator for crime levels- where wards like Cannons and Edgware are located, as there're lots of dark areas and they're highly concentrated. The north/ west have got the lowest indicator levels for street crime, as there're a lot of light areas that are fairly highly concentrated, wards like Pinner, Hatch End, Headstone north, and Pinner south are located. Income-darker=less income, lighter=more income. This map (see above) shows us the levels of income in wards, across Harrow. The map shows us that generally fairly low income levels are widely dispersed across the borough, the fact that there is no legend available for this map makes it less reliable. The south of the borough seems to have a lower indicator level for income, as these areas are darker and highly concentrated, where wards like Greenhill, Marlborough, and Kenton are situated. Generally the east of the borough seems to have the low levels of income too (second after the centre). The north west section of the borough seems to have fairly low levels of crime as there are lighter areas, wards like Pinner, Hatch End, Rayners Lane, and Headstone north are located. Conclusion By comparing the 4 variations between the standards of living in Harrow for all 4 of the GIS maps, I have found that in general, the north west of the borough has got the lowest indicators for street crime, and population density, while having the highest indicators for life expectancy, and income. I think this is due to the fact that the categories may be interdependent. I think that because people in the north west generally have a higher income compared to the rest of the borough, so this could've had an impact on the other results from the other categories, e.g. the reason why there is a low indicator for population density in the area could be because the house prices are higher in this area, so people can't really afford to live in this area (as the majority of the rest of the borough seem to generally have a lower income level). Also, the results suggest that street crime levels are generally low in this area because of the low indicator of population density in this area. I have also found that in general, the south/west of the borough has got the highest indicator for population density levels, street crime levels, low income levels, and a low indicator for life expectancy levels. I think that this is due to the fact that the categories may have a correlation. I think that because people in the north west generally have a high indicator for population density levels, as they may have a low income compared to the north west of the borough (which has a high indicator for income), so they can't really afford to live in the north west, this could also be the reason why generally street crime levels are higher in the south east, because of the high indicator for population density. Also, the reason that the area in general has a low indicator for life expectancy may be because of the larger amount of people who live there.

Hrm: Selection Process

UNIVERSITY OF SAN AGUSTIN GRADUATE SCHOOL MASTER OF BUSINESS ADMINISTRATION SELECTION PROCESS: SURVIVAL OF THE FITTEST IN PARTIAL FULLFILLMENT OF THE REQUIREMENTS ON THE HUMAN RESOURCE MANAGEMENT SUBMITTED BY: MAY O. TOLENTINO SUBMITTED TO: DR. CARMEN N. HERNANDEZ Selection Process: Survival of the Fittest Introduction Charles Darwin first pondered this concept in his work On the Origin of Species during the 19th century in the context of the survival and extinction of biological species.Later did Herbert Spencer coin the phrase to draw comparable idea on his economic theories. Survival of the fittest according to Darwin’s theory means that only the ones most suited to a particular environment will survive. Those who can’t adapt will surely perish, while those who can adapt will stick around, and maybe even become suited to new environments. We might ask did they discover anything that might be applicable to business in the 21st Century? Or its relevance could be also a pplied in human resource management more specifically in selection process?Let us think of nature and ecological systems as a vast â€Å"free market† of perfect competition, where all living organisms are competing with each other for limited resources (sunlight, water, minerals, etc. )? Synonymous as to the many job applicants competing with each other in a struggle for survival or in plain employment term- to be hired. To be chosen as the best fitted candidate among the crowd of applicants for the one coveted position is indeed collectively tend to operate in ways analogous to natural eco-systems.Is it possible that success and survival in the wild might be analogous to success and survival in the employment race? Selection can be conceptualized in terms of either choosing the fit candidates or rejecting the unfit candidates, or a combination of both. Selection process assumes that there are more candidates than the number of candidates actually selected, made possible thro ugh the recruitment process. According to Gupta (2006), selection is the process of choosing the suitable persons out of all the participants.In this process, relevant information is collected through a series of steps so as to evaluate their suitability on the job to be filled. Furthermore, selection is the process of assessing the candidates in various means and making a choice followed with an offer of employment (Graham, 1998, p. 206). Selection is an important function as no organization can achieve its goal without selecting the right people, where wrong choice would lead to wastage of time, money and spoils the environment of the organization.In this regard, scientific selection and placement of personnel will go a long way in building up a stable workforce, where it helps to reduce absenteeism and labor turnover as well as very helpful in increasing the efficiency and productivity of the organization (Dessler, 2005). Selection vs. Recruitment Selection is different from recr uitment, where recruitment technically happens before selection. Recruitment involves identifying the sources of manpower and encourages them to apply for the job opening. On the other hand, selection is choosing the best out of those recruited.Recruitment aims at increasing the number of applications for more choices. According to Prasad (2005), recruitment and selection differs in terms of objective, process, technique, and outcome which are discussed as follows: Firstly, the ultimate purpose of both is to acquire suitable candidates but their immediate objectives differ, where the basic objective of recruitment is to attract maximum number of candidates so that more choices are available; the basic objective of selection is to choose best out of the available candidates.Secondly, recruitment differs from selection in terms of process, where it adopts the process of creating application as large as possible; while selection adopts the process of screening as fewer candidates or so metimes one candidate is selected. Thirdly, as to the techniques involve; recruitment techniques are not really intensive, requiring skills as against in selection process where highly specialized techniques are required.Lastly, since both are interlinked steps in the process of manpower acquisition, they differ in terms of outcome; where the outcome for recruitment is application pool which become input for selection process which on the other hand the outcome is finalizing the candidates who will be offered jobs. Factors (Conditions) for Selection Process The basic idea in selection process is to solicit maximum possible information about the candidates to ascertain their suitability for the employment; and given the fact that there are factors which affect in collecting such information (Prasad, 2005, p. 06), he proposed the following factors which determine the steps in the selection process: 1. Various steps involve in the selection process depend on the type of personnel to be selected. For example, more information is required in the selection of a manager than a subordinate worker. 2. Selection process depends on the sources of recruitment and the method that is adapted for making contact with prospective candidates.For example if we used tv ads, selection process is more time consuming and comprehensive whereas campus recruitment is shortened and maybe completed in a day. 3. Selection process depends on the number of candidates that are available for selection. If a large number of applicants, we also need to create various filtering points to reduce the number of applicants at a successive point while a small applicant turnout would mean lesser filtering points required. 4. Organization’s selection policy also determines the ways to be involved in the selection process.For example in JBLFMU context, where selection of industry experts as Board Members are stipulated in the policy should be an alumnus of the university and hold the highest or p resident position of any international sponsored shipping companies in the Philippines. Gupta suggests that the selection process can be successful if the following conditions are met: 1. Someone should have the authority to select; where this authority comes from the employment requisition as developed through analysis of the workload and workforce. 2. There must be one standard of human resource with which applicant can be compared.In other words, a comprehensive job description and job specification should be available beforehand. 3. There must be a sufficient number of applicants from whom the required number of employees maybe selected. In this regard, recruitment and selection process invariably influence the whole matter of employment function in the organization. Steps in Selection Process Selection process consist of the series of steps; at each stage, facts may reveal something about a candidate that may either be a win or blow on his/her chances on the job. It is a series of barriers or challenges in which the applicant must cross.These hurdles or screens are designed to eliminate unqualified candidate at any point in the selection process. There is no exact formula or standards to be used in all organizations or for all jobs. The complexity of selection procedures increases with the level of responsibility of the position to be filled. Therefore, the strategy and method used for selecting employees varies from firm to firm or from one job to another. For instance in JBLFMU, the recruitment and selection process differs to a faculty candidate and a personnel applicant.Scholars of Human Resource Management such as Gupta, Prasad, Armstrong, and Ivancevich, suggested the following steps to be involved in employee selection process, though not necessarily to be implemented chronologically: 1. Preliminary Interview 2. Application Form 3. Selection Test (Physical, Cognitive and Personality Test) 4. Work Samples 5. Employment Interview 6. Medical Examinati on 7. Reference or Background Check 8. Final Approval 9. Employment 10. Induction 11. Follow-up or Evaluation Applicability of Selection Process in JBLFMUIn the context of JBLFMU environment; most of the above steps in selection process are applied both on academic and non-academic personnel, however the exercise does vary from the steps. For instance, in non-academic personnel once applications are received, short listing of applicants is done by the HR officer in respect to the applied jobs, preliminary interview is organized with the respective department head, methods of assessment is done by administering various forms like taking of aptitude or job related and personality tests.Then those who passed will go to another round of final interview then final selection is done together with the department officer. Selected applicant is called to fill various forms including medical examination to effect his/her employment; if found fit is awarded offer of employment stipulating term s and conditions of employment. Duties are assigned and orientation is undertaken. But if all applicants happen to fail the standards of the selection process, the post will be advertised again for recruitment. As for academic personnel, the difference lies on the additional steps of a twice presentation of simulated teaching.Then the person to approve the teaching plantilla will include the HR Officer, Subject Area Head, Dean of the College and the university administrator. To wit based from the theories discussed above, JBLFMU abides to the following steps in selection process: 1. Screening of applications, where available applications should be short listed in respect to their qualifications and experience in correspond to the job requirement. Only applicants who fit the bill should be interviewed. For large number of applicants, aptitude test could be used to screen them. 2.Prepare for the interview, where at this step the type of interview is established, it can be I groups or individually; written or oral interview. Guideline and questions are prepared beforehand. 3. Develop factors and methods of assessment, where various score sheets and assessment forms are prepared in order to maintain consistency. 4. Conduct the interview or as for academic personnel a demo teaching, where at this stage applicants are given equal chance to demonstrate their strength and capabilities in respect to the requirement of the job. 5. To undertake cross referencing for interviewees.Check resumes for related experiences and background check. 6. Communicating the decision to the candidates. At this stage the applicant is informed of the result via letter or phone call. The chosen candidate will be asked to come and fill required forms to effect the employment. 7. Requiring a medical examination on the selected applicant to avoid future problems that might affect job performance. 8. Offering letter of employment and filling required forms to effect employment functions, where in that contract stipulates terms and conditions of employment. 9. Placement and orientation.It is at this step the JBLFMU selection process ends, where the employed applicant is endorsed under his/her supervisor followed by a company orientation. Conclusion Therefore, the basic objective of selection is to hire those candidates that are suitable or fitted for the position with a high probability of job success. A multiple hurdle plan is the best selection strategy. Selection hurdles or tests include pre-employment inquiries, application forms, initial screening interviews, background investigations, teaching demo for academic applicants and interviews.Also, recruiting and selecting the right people for the company is a challenge, and every situation is unique. JBLFMU should be innovative, persistent and realistic, and can communicate the strength of the institution and the benefits of the position offered to attract high quality employees to build careers in the organization. Survi val of the fittest in selection process perspective redounds to matching the best qualified candidate to fit the requisites or requirements of the job in achieving organizational goals. This in turn will mutually benefit the individual and the organization, as they adapt to the changing environment.Bibliography Armstrong, M. (2006). A Handbook of Human Resource Management Practice. (10th edition ed. ). London: Kogan Page Limited. Dessler, G. (2005). Human Resource Management. (10th edition ed. ). New Jersey: Pearson Prentice Hall. Gupta, C. (2006). Human Resource Management (Rev. Edition ed. ). New Delhi: Sultan Chad and Sons. Ivancevich, J. (2003). Human Resource Management (9th Edition ed. ). New York: McGraw Hill. Prasad, L. (2005). Human Resource Management (2nd Edition ed. ). New Delhi: Sultan Chad and Sons. Rush, D. (1995). Biology: Natural Science (3rd Edition ed. ) New York: Pearson Prentice Hall.